Repairing aluminum boats

Free 2-day Shipping On Millions of Items. What are the best tips for repairing aluminum boats? How do you repair a leaking aluminum boat? How to restore aluminum jon boat?

Remove the scrap aluminum material from the underside of the hull.

For added strength and protection, you and your assistant can flip the boat over and sand the inside part of the crack area. Run another bead of heated brazen weld over the crack area, and then file it down. Heat the torch and start welding all around the edges. Continue melting the metal and blending the patch together with the surface of the aluminum until the hole is repaired. Leave the repaired area to cool off thoroughly and to cure.

Then fill the seams and rivets in this area while the aluminum is still warm. Repairs Leaks in Aluminum Boats. This fusion bondage epoxy will repair and waterproof aluminum boat rivets, minor cracks and small holes without welding.

All you need is a standard torch and fine sandpaper or a wire brush. Instructions included. Large size sticks will handle twice the repairs of other kits.

In the case of aluminum on a boat , the main culprit for pitting is salt water. Listed below are some tried and true methods for removing this common and annoying corrosion that has plagued many a boat owner. Step 1: Wash Start by rinsing off all the dirt from the aluminum surface. I have been reading old posts about fixing aluminum and removing dents but always find contradictions in methods and philosophy.

I want to get to the bottom of this once and for all. Valco boats are like Grumman canoes: thick aluminum made to aircraft specs from when America was Great Before. Aluminum boats are very durable and last for years, even with punishing use. You can see old aluminum boats almost any weekend on most lakes and rivers.

But even boats as strong as these still lose their shine and need to be refurbished occasionally to make the owner proud. More Buying Choices $32. They’re light, economical, nearly maintenance-free, easy to repair and almost impervious to damage. The Coast Guard and Navy prefer them for small craft, and many commercial boats are aluminum , as are many recreational craft.

Chalk up the scratch to good use of the boat and move on. Unless you have a welder for aluminum , this is a fantastic fix.

You have to clean away the paint with a wire wheel or sandpaper the area first. You then paint over the bare aluminum with self etching spray primer from Napa Auto and then paint to match your boat color. As a kid I had a 12ft aluminum duck boat. I used a product called Devcon.

It an excellent product for aluminum boats.